Meat Vegetable Food Processor 6L Electric Multifunctional Food Shredder Vegetable Chopper

Parameters:<br> Voltage(V)：110V<br> Motor Power (W)：1800W<br> Volume(L): 6L<br> Efficient Volume(L): 3.5L<br> Rotating Speed(rpm): 986-2470<br><br> Food Feeding<br> Attention: food is to be fed only when the machine is stopped. The knob for controlling speed should be at "LOW" position.<br> 1. Turn the loading arm at anticlockwise direction to remove the cover.<br> 2. Pay attention to the two blades while feeding food into the container. Food should be cut into small blocks before feeding if it is big in size.<br> Warning: the food in container is not allowed to be more than 1/2 of the total volume. But it is not suggested if food is lower than the upper blade. If food is too litle, machine may vibrate while runing.<br> 3. In case of accidents, the operator should pay attention on his own position. The operator's body should be vertical with the working table. It's not allowed to press on the machine or prevent it from moving. Do not get close to the machine, and avoid to touch the machine directly.<br> 4. Put the cover into initiative position, then turn the loading arm till clocked.<br> 5. Press the start-up button.<br> 6. It is not allowed to keep low speed at a long time.<br> 7. While machine mixing, extra food should be fed via the hole on the cover if needed.<br> 8. When the working finished, turn the speed controlling knob to "OFF" position to stop the machine.<br> Attention: the normal working time of the machine cannot be kept more than 3mins. The cutting time decide the size of food.<br><br> Sharpener<br> Warning:Please sharpen the blades by the following procedures if the blades are not sharp enough to cut the food.<br> 1. Turn the loading arm to remove the cover;<br> 2. Move away the fixing axis of rotating blades;<br> 3. Use the sharpener to sharp the blade from inside to outside along the blade edge.<br><br> Daily Cleaning<br> a. The machine should be cleaned at least one time every day. If necessary, more times should be cleaned.<br> b.The part touching the food directly or indirectly must be cleaned.<br> c.Water or high pressure spraying water cannot be used to clean directly. Brushes or other tools which may damage the surface cannot be used.<br> d. Blades should be clean and use cloth to dry it after use, and put some oil to protect the blades in order to avoid get rusted.<br> Rotate the loading arm, remove the cover, and the blade fixing axis and container can be lifted easily. Then use water and neutralized detergent to clean the above-mentioned parts.<br><br> Attention: gloves should be wore for protection while operating.<br> Attention: power should be cut off.<br> Clean the machine body by neutralized detergent and wet cloth. Use dry cloth to dry the machine after cleaning.<br><br> Item included(020434):<br> INTBUYING Meat and vegetable blender food shredder 110V 6L

• This machine is made of 304 stainless steel.It can make sure that the components making contact with food meet the requirements of health standards and are prevented from corrosion of acid, salt and oxidation.
• The blades are made of 4Cr13 stainless steel, the sharpness and hardness ensure the functions of cutting, breaking, mixing and scrubbing. The blades should be cleaned and dried with cloth after use, and some oil is applied to the blades to protect the blades against rust.
• Mixing container is made of stainless steel, with a heat transfering bottom, and with handles making it portable.
• This processor is equipped with a 6L stainless steel bowl, which meets the cutting needs of food ingredients, achieving high efficiency without the need to add ingredients time and time again, saving time and labor costs.
• The process can be checked through the transparent top at any time, and seasoning can be added through the hole at any time.